 This Portable Case Conversion Kit includes a case and all hardware necessary to convert a fixed mount Piranha unit to portable operation. |
More info ›› |
|
 With the GPS Receiver, you can access advanced trackplotter and navigation capabilities of your Fishing System. |
More info ›› |
|
 Hand-held GPS Connector Cable connects a hand-held GPS unit to your Fishing System for easy viewability of trackplotting information. Three different variations are available: Garmin and Megallan hand-helds as well as a bare-wire cable to attach to other hand-held GPS units. |
More info ›› |
|
 The SmartCast Wireless Sonar Link connects any Humminbird Fishing System with the revolutionary SmartCast Remote Sonar Sensor to show fish and structure up to 100 feet away in any direction ... |
More info ›› |
|
 Using HumminbirdPC software and serial data communication capabilities of your PC, you can access the most advanced capabilities of the Fishing System. |
More info ›› |
|
 This provides a simple and easy method to update your Humminbird Fishing Systems units operating software, by downloading the updates to an MMC device first and then updating the unit at your convenience. |
More info ›› |
|
 The Mount and Transducer Kits include everything necessary to set up a second mounting station with a dedicated trolling motor transducer. |
More info ›› |
|
 Transom mount transducer, 20 ft cable, 6 elements, 455 kHz, 7 pin connector. Used with WIDE 3D VISION, WIDE 3D VISTA, WIDE 3D PARAMOUNT. |
More info ›› |
|
 Bronze thru-hull transducer, six beam, 53 degree, 455 kHz, 3D sonar applications only. |
More info ›› |
|
 Bronze Thru Hull Tri Transducer with with Temp and Speed. Transducer dimensions: 7"L X 2.5"W X 1.25"D(below hull); Front shaft diameter: .75", back shaft diameter: 2". Includes fairing block. |
More info ›› |
|
|
Bronze thru Hull transducers are for large boats and boats with in-board motors that make typical transducers ineffective. |
More info ›› |
|
 Portable Transducer with Temperature Sensor, Hydrodynamic, single or dual beam (depending on which fish finder it is used with), 24 and 53 degree cone angles, 200/83 kHz. Includes 15' cable, portable mounting hardware. |
More info ›› |
|
|
Bronze thru hull transducer, single or dual beam use. 20/60 degree, 200/83kHz. Transducer dimensions: 5.25L X 2.75"W X 1.2"D (below hull); Shaft diameter: .86". |
More info ›› |
|
 The RF40 "A" Remote Sonar Sensor is a replacement for the sensor originally packaged with the Smartcast Wireless Fishfinder. The RF40A works with all Smartcast products. |
More info ›› |
|
 The RF40 "B" Remote Sonar Sensor will allow you to fish in close proximity to an "A" model sensor (the type of sensor that is originally packaged with the Smartcast Wireless Fishfinder) with reduced signal interference. |
More info ›› |
|
 Power cable, 10 ft, waterproof. Used with all Humminbird products manufactured since 1989. |
More info ›› |
|
 Extension cables add extra length to the standard transducer cable. Available in a varity of lengths, they simply plug-in to the existing transducer and your fishfinder. |
More info ›› |
|
|
Extension cables add extra length to the standar transducer cable. Available in a varity of lengths, they simply plug-in to the existing transducer and your fishfinder. |
More info ›› |
|
 Extension cables add extra length to the standard speed and temp sensors. Available in a varity of lengths, they simply plug-in to the existing sensor and your fishfinder. |
More info ›› |
|
|
Extension cables add extra length to the standard speed and temp sensors. Available in a varity of lengths, they simply plug-in to the existing sensor and your fishfinder. |
More info ›› |
|
